#INBOARD BOATS VENTILATION SYSTEM DRIVER#
#INBOARD BOATS VENTILATION SYSTEM MANUAL#
#INBOARD BOATS VENTILATION SYSTEM FULL#

#INBOARD BOATS VENTILATION SYSTEM DRIVER#

The boat successfully completes the test course if the driver is able to maneuver it between the designated avoidance markers without striking the markers and without losing control of the boat or reducing the throttle setting.

#INBOARD BOATS VENTILATION SYSTEM FULL#

If the boat successfully completes this run of the test course and the motor was not at full throttle, continue to increase the throttle setting and run the test course passing outside the designated avoidance marker for 42.5 miles per hour or more until the boat fails to complete the test successfully or the boat completes the test course maneuvers successfully at full throttle. If the boat successfully completes this run of the test course and the motor was not at full throttle, increase the throttle setting to 42.5 miles per hour or more and run the course passing outside the designated avoidance marker for that speed without contacting any of the course markers. If the boat successfully completes this run of the test course and the motor was not at full throttle, increase the throttle setting to 37.5 to 42.5 miles per hour boat speed and run the course passing outside the designated avoidance marker for that speed without contacting any of the course markers. If the boat successfully completes this run of the test course, increase the throttle setting to 35 to 37.5 miles per hour boat speed and run the course passing outside the designated avoidance marker for that speed without contacting any of the course markers. Set throttle for 30 miles per hour boat speed and run the test course set up in accordance with Figure 183.53, passing outside the designated avoidance marker for 35 to 37.5 miles per hour without contacting any of the course markers. UL 1114 Marine (USCG Type A) Flexible Fuel Line Hose-1987 (UL), 12 Laboratory Drive, Research Triangle Park, NC 27709–3995: SAE J557 High Tension Ignition Cable-1968 Society of Automotive Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096: MILSPEC-P-21929B Plastic Material, Cellular Polyurethane, Foam-In-Place, Rigid-1970 Military Specifications and Standards, Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111–5094 National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269: IEEE 45 IEEE Recommended Practice for Electrical Installations on Shipboard-1983. Institute of Electrical and Electronics, Engineers, Inc., 445 Hoes Lane, Piscataway, NJ 08854: University Drive, Arlington Heights, IL 60004:ĪMCA 210–74: Laboratory Methods of Testing Fans for Ratings-1974Īmerican Boat and Yacht Council, Inc., 613 Third Street Suite 10, Annapolis, Maryland 21403:ĪBYC A–16 Electric Navigation Lights-1997Īmerican Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428–2959:ĪSTM D 471–96, Standard Test Method for Rubber Property-Effect of LiquidsĪSTM D 1621–94, Standard Test Method for Compressive Properties of Rigid Cellular PlasticsĪSTM D 1622–93, Standard Test Method for Apparent Density of Rigid Cellular PlasticsĪSTM D 2842–97, Standard Test Method for Water Absorption of Rigid Cellular Plastics Navigation light certification requirements.Īir Movement and Control Association, 30 W. Plastic encased fuel tanks: Installation.įuel filters and strainers: Installation. Seals and gaskets in fuel filters and strainers. Spud, pipe, and hose fitting configuration. Overcurrent protection: Special applications.Ĭellular plastic used to encase fuel tanks.

Purpose, applicability, and effective dates.Ĭonductors in circuits of less than 50 volts.Ĭonductors in circuits of 50 volts or more. Level flotation test without weights for persons capacity.įlotation Requirements for Outboard Boats Rated for Engines of 2 Horsepower or Less

#INBOARD BOATS VENTILATION SYSTEM MANUAL#

Persons capacity: Boats rated for manual propulsion and boats rated for outboard motors of 2 horsepower or less.įlotation and Safe Loading Requirements–Outboard Motor and Related Equipment Test Weightsįlotation Requirements for Inboard Boats, Inboard/Outdrive Boats, and Airboatsįlotation Requirements for Outboard Boats Rated for Engines of More Than 2 Horsepowerįlotation and certification requirements. Persons capacity: Inboard and inboard-outdrive boats. Maximum weight capacity: Boats rated for manual propulsion and boats rated for outboard motors of 2 horsepower or less. Maximum weight capacity: Inboard and inboard-outdrive boats.

Inboard boats ventilation system